Ira A. Fulton Schools of Engineering · School of Sustainable Engineering and the Built Environment

Barzin Mobasher Research Group

Mechanics of cement-based and fiber composites, from laboratory testing and constitutive modeling to design procedures and software.

The research spans fiber and textile reinforcement, fracture and interface micromechanics, durability, and high strain rate and ballistic composites. It has been applied to structures as different as thin textile reinforced panels, precast tunnel segments, light rail track slabs, and jet engine containment fabrics.

People
Crews placing fiber reinforced concrete for the Valley Metro light rail track slab

Placing the rebar-free fiber reinforced concrete track slab on the Valley Metro Northwest Extension, May 2023.

Research subjects

All research
A concrete beam on two roller supports in a test frame, loaded at midspan, with gauges mounted on the beam

Fiber reinforced concrete

Fiber reinforced concrete (FRC) is concrete with short steel or polymer fibers added during mixing. The fibers bridge the cracks that form under load, so the cracked concrete keeps carrying tension.

Fiber reinforced concrete
Crack patterns traced on the side faces of two hybrid reinforced concrete beams

Hybrid reinforced concrete design

Hybrid reinforced concrete (HRC) is concrete reinforced with both continuous steel bars and short fibers mixed through the concrete. The fibers carry tension across cracks and share the load with the bars, so part of the bar reinforcement can be replaced.

Hybrid reinforced concrete design
Open-mesh fabric coated with wet grey cement slurry, hanging from the rollers of a laboratory machine

Textile reinforced concrete

Textile reinforced concrete is a thin cement-based composite reinforced with layers of fabric made from continuous yarns of glass, carbon or polymer. The group developed the pultrusion process for making these laminates, measured how they crack and harden in tension, formed them into structural shapes and sandwich panels, and derived closed-form equations for their design.

Textile reinforced concrete
A curved precast concrete tunnel segment resting on two roller supports inside a steel load frame, with a hydraulic ram pressing on its crown

Precast tunnel lining segments

A precast segmental tunnel lining is a ring of curved concrete segments placed behind a tunnel boring machine to support the ground. The group tests full-size segments reinforced with steel or synthetic fibers in flexure and under thrust loads, works the tension properties of the concrete back from beam tests for use in design, and applies statistical process control to segment production.

Precast tunnel lining segments
A UHPC beam in four-point bending with its measured strain field

Ultra-high performance concrete

Mixtures developed with the Arizona Department of Transportation, flexural tests measured with digital image correlation, and a UHPC beam test replayed in 3D with its inverse analysis.

Ultra-high performance concrete
The fatigue rig on the full-scale track slab at ASU, seen from above

Valley Metro track slab

A light rail track slab reinforced with steel fibers and no rebar, tested over two million load cycles at ASU and built on the Northwest Extension Phase II in Phoenix.

Valley Metro track slab

Fields addressed

All fields
  • Textile and fabric reinforced concrete82 papers
  • Fiber reinforced concrete, mechanics and design73 papers
  • Impact, high strain rate and ballistic composites46 papers
  • Numerical modeling and simulation38 papers
  • Durability, shrinkage and damage32 papers
  • Cementitious materials and sustainability31 papers
  • Fiber and interface micromechanics24 papers
  • Fracture mechanics of cement composites23 papers
  • Ultra-high performance concrete19 papers
  • Hybrid reinforced concrete19 papers
  • Processing and manufacturing16 papers
  • Pavements, slabs and infrastructure15 papers
  • Repair, retrofit and strengthening13 papers
  • Functional and specialty materials13 papers
  • Natural and recycled fiber composites12 papers
  • Structural engineering and design practice12 papers
  • Precast tunnel lining segments8 papers
  • Experimental methods and measurement8 papers
  • Statistics, quality control and reliability8 papers
  • Early-age behaviour of cement paste6 papers
  • Engineering education2 papers

Selected publications

All publications

Journal 2026

Limit-state based design of hybrid reinforced UHPC flexural beams using parametric modeling

D. D. Patel, C. Pleesudjai, N. Neithalath, B. Mobasher

Journal 2026

Mechanism of tensile load sharing in hybrid reinforced concrete flexural members

Chidchanok Pleesudjai, Devansh Patel, Daniel L. Araujo, Carlos A. S. Oliveira, Romildo D. Toledo Filho, Barzin Mobasher

Journal 2025

Efficiency of hybrid reinforced concrete beams with low reinforcement ratios

Chidchanok Pleesudjai, Carlos A. S. Oliveira, Daniel L. Araujo, Devansh Patel, Moacir Alexandre Souza de Andrade, Romildo Toledo Filho, Barzin Mobasher

Software

HRC Designer

Analysis and design software for members made with fiber reinforced concrete, hybrid reinforced concrete, UHPC, and textile reinforced concrete. Flexural test data gives the material properties, which then carry into section and member calculations in SI or US units.

HRC Designer. UHPC Beam 1. The fitted tensile stress-strain law on the left and the measured and fitted load-deflection curves on the right.

News

September 3, 2026

HRC Designer 4.3

Version 4.3 is out as a free Windows installer. It runs on the MATLAB Runtime, so no MATLAB license is needed, and the user manual is at hrcdesigner.com.

2026

Limit-state design of hybrid reinforced UHPC beams

Published in Engineering Structures 357, 122353, together with the companion Python package parametric-uhpc.

2026

RILEM Spring Convention and the UHPC Symposium

Two papers on the design of textile reinforced concrete at the RILEM Spring Convention 2026, and two on reinforced UHPC beams and rural bridge decks at the Fourth International Interactive Symposium on UHPC.

All news and coverage

Laboratory footage

UHPC beam under ASTM C1609 flexure, with strain field

Digital image correlation on a UHPC beam in four-point bending, alongside the flexural stress against net deflection curve. Several strain bands form first, then one opens into a crack and the others unload.

All videos