Publications
148 journal articles, 84 conference papers, and 40 books, reports, and theses.
2026
A Meso-Scale Modeling Framework Using the Discrete Element Method (DEM) for Uniaxial and Flexural Response of Ultra-High Performance Concrete (UHPC)
Applied Sciences, 16, 1230
An Interactive Inverse-Analysis and Design Tool for Reinforced UHPC Beams
Fourth International Interactive Symposium on UHPC
Damage modeling of ballistic impact in woven fabrics
Advanced Fibrous Composite Materials for Ballistic Protection, 627-642
Design Framework for Sustainable Textile-Reinforced Concrete Using Laminate Theory and Damage Modeling
RILEM Bookseries, 249-256
Influence of Hybrid Short Fibres on the Mechanical Performance of Textile Reinforced Concrete Composites
Lecture Notes in Civil Engineering, 687-695
Limit-state based design of hybrid reinforced UHPC flexural beams using parametric modeling
Engineering Structures, 357, 122353
Mechanism of tensile load sharing in hybrid reinforced concrete flexural members
Construction and Building Materials, 506, 144835
Modeling of layered, multi-material 3D-printed concrete flexural members—towards efficient structural design and optimization
Materials and Structures, 59
Software for Mechanical Characterization and Design of Textile-Reinforced Concrete in Flexure
RILEM Bookseries, 625-632
Synergizing Ultra-High-Performance Concrete and Conventional Concrete for Economical and Sustainable Three-Dimensional-Printed Composite Section
ACI Materials Journal, 123, 139-152
Technology Transfer and Field Implementation of Ultra-High-Performance Concrete for New and Retrofitting Rural Bridge Decks
Fourth International Interactive Symposium on UHPC
2025
Back-calculation of mechanical properties of fiber-reinforced concrete in tunnel lining segments
Structural Concrete, 26 (5), 6019-6040
Characterization of Constitutive Response of Natural Fibers Reinforced Concrete under Flexural Loading
IABSE Congress Reports, 25, 606-613
Efficiency of hybrid reinforced concrete beams with low reinforcement ratios
Materials and Structures, 58 (6), 218
Efficiency of Microstructural Reinforcement for Concrete in Tension
Proceedings of the C3 Symposium 2025, Purdue University
Experimental investigation of tension stiffening in hybrid reinforced concrete ties
Construction and Building Materials, 458, 139505
Generalized Nonlinear Moment-Curvature model for flexural fatigue of hybrid reinforced concrete beams
Engineering Structures, 345, 121539
Sources and Substitutes for Fly Ash in Concrete
Arizona Department of Transportation Research Center, Report SPR-780
Strain rate and fracture analysis in closed-cell aluminum foams in tension: Quasi-static to dynamic loads
Materials Today Communications, 44, 111959
Tensile properties and self-healing mechanism of pre-cracked UHPC under different curing environments
Cement and Concrete Research, 198, 107985
2024
Article of RILEM TC 292-MCC: bond behaviour of textile-reinforced concrete—a Review
Materials and Structures
Design of UHPC Structural Connection Elements for Precast Bridge Decks
BEFIB 2024, RILEM Bookseries Vol. 54, Springer Nature Switzerland, 54, 276-283
Development of TRC Plates and Angles for Compression Applications
RILEM Bookseries, 721-730
Effects of temperature and loading rate on the shear performance of GFRP-steel single-lap joints
Case Studies in Construction Materials, 21, e03756
Post-Consumer Carpet Fibers in Concrete: Fiber Behavior in Alkaline Environments and Concrete Durability
Materials, 17, 977
Statistical Process Control of Fiber-Reinforced Concrete Precast Tunnel Segments
ACI Materials Journal, 121 (2), 127-139
Synergising hybrid short fibres and composite cements for sustainable and efficient textile-reinforced concrete composites
Journal of Building Engineering, 93, 109857
The influence of steel fibers on the bond slip behavior between rebars and concrete: Experimental and analytical investigation
Construction and Building Materials, 411, 134357
Ultra-High-Performance Concrete (UHPC) for Repair and Rehabilitation of Bridge Deck Connections
Final Research Report submitted to Maricopa County Department of Transportation (MCDOT), School of Sustainable Engineering and the Built Environment, Arizona State University
2023
Analytical moment-curvature solutions for generalized textile-reinforced concrete sections
Engineering Structures, 276, 115317
Closed-form solutions for flexural fatigue mechanical degradation of steel fiber reinforced concrete beams
Construction and Building Materials, 409, 134200
Distributed cracking mechanisms in micro-polypropylene based textile reinforced concrete
Materials and Structures, 56
Dynamic Flexural Behaviors of AR-Glass Textile–Reinforced Concrete after Exposure to Elevated Temperatures
Journal of Materials in Civil Engineering, 35
Journal of Structural Engineering, ASCE, 149 (12), 04023188
@article{pleesudjai2023generalized,
author = {Pleesudjai, Chidchanok and Patel, Devansh Deepak and Mobasher, Barzin},
title = {Generalized Nonlinear Moment-Curvature Model for Serviceability-Based Design of Hybrid Reinforced Concrete},
journal = {Journal of Structural Engineering},
volume = {149},
number = {12},
pages = {04023188},
year = {2023},
doi = {10.1061/JSENDH.STENG-12235}
}
Mechanical response of precast tunnel segments with steel and synthetic macro-fibers
Cement and Concrete Composites, 144, 105303
Serviceability-Based Flexural Design of UHPC Beams
International Interactive Symposium on Ultra-High Performance Concrete, Wilmington, Delaware
Subtractive Engineering of Polymer Cladding Induces Tunable UV-C Irradiation from Flexible Side-Emitting Optical Fibers for Biofilm Control in Curved Piping
ACS ES&T Engineering, 3, 2071-2080
2022
A state-of-the-art review on mechanical performance characterization and modelling of high-performance textile reinforced concretes
Construction and Building Materials, 347, 128521
Development of an analytical framework for evaluation of critical fiber length in asphalt concrete with a fiber pullout test
Construction and Building Materials, 360, 129561
Dynamic flexural behavior of AR-glass textile reinforced concrete under low-velocity impact loading
Journal of Sustainable Cement-Based Materials, 12, 49-67
Industrial Floors with Fiber-Reinforced Concrete: A Review of Knowledge and Experience
Concrete International, 44, 28-33
M&S highlight: Di Prisco et al. (2009), Fiber reinforced concrete: new design perspectives
Materials and Structures, 55
M&S Highlight: Hillerborg (1985), The theoretical basis of a method to determine the fracture energy GF of concrete
Materials and Structures, 55
M&S highlight: Naaman & Reinhardt (2006), Proposed classification of HPFRC composites based on their tensile response
Materials and Structures, 55
2021
A review on the tensile behavior of fiber-reinforced polymer composites under varying strain rates and temperatures
Construction and Building Materials, 294, 123565
Applications of Statistical Process Control in the Evaluation of QC Test Data for Residual Strength of FRC Samples of Tunnel Lining Segments
Fibre Reinforced Concrete: Improvements and Innovations, RILEM-fib
Characterization of toughening mechanisms in UHPC through image correlation and inverse analysis of flexural results
Cement and Concrete Composites, 122, 104157
Compressive and thermal properties of foamed concrete at high temperature
Journal of Sustainable Cement-Based Materials, 11, 353-369
Correlation of Tensile and Flexural Response of Continuous Polypropylene Fiber Reinforced Cement Composites
ACI SP-345, Materials, Analysis, Structural Design and Applications of Textile Reinforced Concrete/Fabric Reinforced Cementitious Matrix, American Concrete Institute, 230-242
Effect of Layer Height on Tensile Stress Distribution and Crack Width-and-Propagation in 3D Printed Fiber-Reinforced Flexural Elements
Standards Development for Cement and Concrete for Use in Additive Construction, ASTM STP 1636, ASTM International, 13-26
Enhancing Biomass Value Chain by Utilizing Biochar as A Free Radical Scavenger to Delay Ultraviolet Aging of Bituminous Composites Used in Outdoor Construction
Resources, Conservation and Recycling, 168, 105302
Low-Velocity Impact Experiments and Modeling of TRC Skin-Aerated Concrete Core Sandwich Composites
Materials, 14, 390
Tensile and Flexural Behavior of Ultra-High Performance Concrete (UHPC) under Impact Loading
International Journal of Impact Engineering, 153, 103866
Validation Testing of Precast Tunnel Lining Segments Using Polymeric Fibers
BEFIB2021, RILEM-fib X International Symposium on Fibre Reinforced Concrete, Valencia
2020
Analytical approach for the design of flexural elements made of reinforced ultra‐high performance concrete
Structural Concrete, 22, 298-317
Development of Textile Reinforced UHPC with Reduced Steel Fiber Contents
RILEM Bookseries, 963-970
Elucidating the nano-mechanical behavior of multi-component binders for ultra-high performance concrete
Construction and Building Materials, 243, 118214
Guide to Design and Construction of Externally Bonded Fabric-Reinforced Cementitious Matrix (FRCM) and Steel-Reinforced Grout (SRG) Systems for Repair and Strengthening Masonry Structures
ACI PRC-549.6-20 (ACI Committee 549), 1-159
Relating the nano-mechanical response and qualitative chemical maps of multi-component ultra-high performance cementitious binders
Construction and Building Materials
2019
Developing Ultra High-Performance Concrete Mix Designs for Arizona Bridge Element Connections
Arizona Department of Transportation Research Center, Report SPR-745 (FHWA-AZ-19-745)
Development of Structural Design Procedures for UHPC
Second International Interactive Symposium on UHPC
Fundamental insights into the compressive and flexural response of binder- and aggregate-optimized ultra-high performance concrete (UHPC)
Cement and Concrete Composites
Interface characteristics of jute fiber systems in a cementitious matrix
Cement and Concrete Research
Material design of economical ultra-high performance concrete (UHPC) and evaluation of their properties
Cement and Concrete Composites, 104, 103346
Reinforcing Efficiency of Micro and Macro Continuous Polypropylene Fibers in Cementitious Composites
Applied Sciences
Specifications and Design Guides for Structural Applications of Fiber Reinforced Concrete
Report to Salt River Project, Arizona State University
2018
Analytical displacement solutions for statically determinate beams based on a trilinear moment-curvature model
Structural Concrete
Closed-form Solutions for Interaction Diagrams of Hybrid Fiber-Reinforced Tunnel Segments
FRC2018 Fibre Reinforced Concrete: from Design to Structural Applications, Joint ACI-fib-RILEM International Workshop
Elucidating the influences of compliant microscale inclusions on the fracture behavior of cementitious composites
Cement and Concrete Composites, 94, 13-23
Interaction diagrams for design of hybrid fiber-reinforced tunnel segments
Materials and Structures, 51
Microstructural packing- and rheology-based binder selection and characterization for Ultra-high Performance Concrete (UHPC)
Cement and Concrete Research, 103, 179-190
Quantitative characterization of accelerated aging in cement composites using flexural inverse analysis
Cement and Concrete Composites
Synthesis and characterization of economical, multi-functional porous ceramics based on abundant aluminosilicates
Materials and Design
2017
Analysis and Design Procedures for Strain Hardening Flexural Beam and Panel
Strain-Hardening Cement-Based Composites, RILEM Bookseries, 518-526
Analytical procedures for design of strain softening and hardening cement composites
International Journal of Advances in Engineering Sciences and Applied Mathematics
Effects of loading rate and notch-to-depth ratio of notched beams on flexural performance of ultra-high-performance concrete
Cement and Concrete Composites
Experimental investigation and modelling of the temperature effects on the tensile behavior of textile reinforced refractory concretes
Cement and Concrete Composites
Failure Localization and Correlation of High-Speed Tension and Impact Tests of Strain-Hardening Cement-Based Composites
Journal of Materials in Civil Engineering, 29 (11), 04017212
Influence of Elevated Temperatures. In A Framework for Durability Design with Strain-Hardening Cement-Based Composites (SHCC)
RILEM State-of-the-Art Reports, 109-118
Micromechanics and Microstructure
Textile Reinforced Concrete, 95-165
Tension stiffening approach for interface characterization in recycled aggregate concrete
Cement and Concrete Composites
Tension Stiffening Behavior of Self Compacting High Strength Fiber Reinforced Concrete Incorporating River Gravels
High Tech Concrete: Where Technology and Engineering Meet, 396-404
2016
Experimental study of tensile behaviour of AFRP under different strain rates and temperatures
Journal of Structural Integrity and Maintenance, 1, 22-34
Experimental study on basalt FRP/steel single-lap joints under different loading rates and temperatures
Composite Structures
Flexural Design Procedures for UHPC Beams and Slabs
First International Interactive Symposium on UHPC
Mechanical Characterization of the Tensile Properties of Glass Fiber and Its Reinforced Polymer (GFRP) Composite under Varying Strain Rates and Temperatures
Polymers
Mechanical properties and failure characteristics of CFRP under intermediate strain rates and varying temperatures
Composites Part B: Engineering, 95, 123-136
Moment-Curvature Model and Flexural Design for Hybrid Reinforced, Generalized Section and Ultra-high Performance Concrete Beams
International Journal of Advances in Engineering Sciences and Applied Mathematics
Quantitative 2D Restrained Shrinkage Cracking of Cement Paste with Wollastonite Microfibers
ASCE Journal of Materials in Civil Engineering
Recommendation of RILEM TC 232-TDT: test methods and design of textile reinforced concrete. Uniaxial tensile test: test method to determine the load bearing behavior of tensile specimens made of textile reinforced concrete
Materials and Structures, 49, 4923-4927
Sequential Cracking and Their Openings in Steel-Fiber-Reinforced Joint-Free Concrete Slabs
Journal of Materials in Civil Engineering, 28
Strain energy and process zone based fracture characterization of a novel iron carbonate binding material
Engineering Fracture Mechanics, 156, 1-15
Tensile Behaviors of Basalt, Carbon, Glass, and Aramid Fabrics under Various Strain Rates
ASCE Journal of Materials in Civil Engineering
Tensile mechanical properties of basalt fiber reinforced polymer composite under varying strain rates and temperatures
Polymer Testing, 51, 29-39
2015
Analytical solutions for flexural design of hybrid steel fiber reinforced concrete beams
Engineering Structures, 100, 164-177
Distributed cracking mechanisms in textile-reinforced concrete under high speed tensile tests
Materials and Structures, 49, 2781-2798
Flexural impact response of textile-reinforced aerated concrete sandwich panels
Materials & Design, 86, 187-197
Fracture process zone and tensile behavior of blended binders containing limestone powder
Cement and Concrete Research
Mechanical properties of micro and sub-micron wollastonite fibers in cementitious composites
Construction and Building Materials, 82, 351-359
Tension stiffening in textile-reinforced concrete under high speed tensile loads
Cement and Concrete Composites
2014
Backcalculation of residual tensile strength of regular and high performance fiber reinforced concrete from flexural tests
Construction and Building Materials, 70, 243-253
Comparative evaluation of early age toughness parameters in fiber reinforced concrete
Materials and Structures, 47, 853-872
Correlation of constitutive response of hybrid textile reinforced concrete from tensile and flexural tests
Cement and Concrete Composites
Effect of steel fibres on the tensile behaviour of self-consolidating reinforced concrete blocks
FRC 2014 Joint ACI-fib International Workshop, Fibre-reinforced concrete: From design to structural applications (ACI SP-310), 123-130
Fibre-reinforced concrete: From design to structural applications, FRC 2014 Joint ACI-fib International Workshop proceedings
ACI Special Publication SP-310, fib Bulletin
Finite element modeling of ballistic impact on multi-layer Kevlar 49 fabrics
Composites Part B
Low-velocity flexural impact response of fiber-reinforced aerated concrete
Cement and Concrete Composites
The fracture response of blended formulations containing limestone powder: Evaluations using two-parameter fracture model and digital image correlation
Cement and Concrete Composites
2013
Mechanical behaviors of Kevlar 49 fabric subjected to uniaxial, biaxial tension and in-plane large shear deformation
Composites Science and Technology
Physical and mechanical characterization of Fiber-Reinforced Aerated Concrete (FRAC)
Cement and Concrete Composites
2012
Back-calculation of tensile properties of strain softening and hardening cement composites
High Performance Fiber Reinforced Cement Composites 6, RILEM State of the Art Reports, 83-90
Fiber Reinforced Concrete in Support of Sustainable Infrastructure Systems
BEFIB2012, 8th RILEM International Symposium on Fibre Reinforced Concrete, Guimaraes
Flexural Design of Strain Hardening Cement Composites
BEFIB2012, 8th RILEM International Symposium on Fibre Reinforced Concrete, Guimaraes
Hybrid Reinforcing Systems in Cement Based Matrices - Dynamic and Static Tensile Behaviors
BEFIB2012, 8th RILEM International Symposium on Fibre Reinforced Concrete, Guimaraes
Improvements to Dry Fabric Modeling for Ballistic Mitigation Systems
Model for Early-Age Rate of Evaporation of Cement-Based Materials
ASCE Journal of Engineering Mechanics
Moisture loss characteristics of cement-based materials under early-age drying and shrinkage conditions
Construction and Building Materials
2011
Behaviour of Strain-Hardening Cement-Based Composites Under High Strain Rates
Journal of Advanced Concrete Technology, 9, 51-62
Characterization of Dynamic Tensile Testing Using Aluminum Alloy 6061-T6 at Intermediate Strain Rates
ASCE Journal of Engineering Mechanics
Characterization of Mechanical Behavior of Kevlar 49 Fabrics
Design and Construction Aspects of Steel Fiber-Reinforced Concrete Elevated Slabs
ACI Special Publication SP-274, paper 7
Dynamic Tensile Testing of Kevlar 49 Fabrics
ASCE Journal of Materials in Civil Engineering
Effect of fiber shape and morphology on interfacial bond and cracking behaviors of sisal fiber cement based composites
Cement and Concrete Composites, 33, 814-823
Experimental observations of early-age drying of Portland cement paste under low-pressure conditions
Cement and Concrete Composites
Experimental study and modeling of single yarn pull-out behavior of Kevlar 49 fabric
Composites Part A
Impact Behavior of 3D Fabric Reinforced Cementitious Composites
Modal Analysis of a Servo-Hydraulic High Speed Machine and its Application to Dynamic Tensile Testing at an Intermediate Strain Rate
Experimental Mechanics
Non-Contacting Strain Measurement in Dynamic Tensile Testing
Strain rate effect on the tensile behaviour of textile-reinforced concrete under static and dynamic loading
Materials Science and Engineering: A, 528, 1727-1734
Thermal and Mechanical Characterization of Contiguous Wall Systems for Energy Efficient Low Cost Housing
ASME 2011 5th International Conference on Energy Sustainability, ESFuelCell2011
2010
A multi-scale investigation of the mechanical behavior of durable sisal fiber cement composites
Revista Materia, 15, 338-344
Correlation of Elastic Modulus and Permeability in Concrete Subjected to Elevated Temperatures
Journal of Materials in Civil Engineering, 22 (7), 735-740
Experimental Study of Dynamic Behavior of Kevlar 49 Single Yarn
Fatigue behavior of sisal fiber reinforced cement composites
Materials Science and Engineering A, 527, 5507-5513
Hybrid Control Charts for Active Control and Monitoring of Concrete Strength
Journal of Materials in Civil Engineering, 22 (1), 77-87
Innovative Composites - Textile Reinforced Concrete (TRC) for Sustainable Construction
US-Israel Workshop on Sustainable Buildings, Materials and Energy, Technion, Haifa
Investigation of corrosion damage and repair system in a concrete jetty structure
ASCE Journal of Performance of Constructed Facilities
LS-DYNA Implemented Multi-Layer Fabric Material Model Development for Engine Fragment Mitigation
Proceedings, 11th International LS-DYNA Users Conference, Detroit, MI, June 2010, 47-59
Modeling of tension stiffening in reinforced cement composites: Part I. Theoretical modeling
Materials and Structures
Modeling of tension stiffening in reinforced cement composites: Part II. Simulations versus experimental results
Materials and Structures
Multi-parameter study of external sulfate attack in blended cement materials
Construction and Building Materials
Sustainable Design of Structural Concrete Materials: a Case Study of Incorporating Materials Science, Structural Mechanics, and Statistical Process Control
Final report
2009
Advances in Natural Fiber Cement Composites: A Material for the Sustainable Construction Industry
4th Colloquium on Textile Reinforced Structures, CTRS4, Dresden, 377
Bond Mechanisms in Sisal Fibre Reinforced Cement Composites
11th International Conference on Non-conventional Materials and Technologies, NOCMAT 2009, Bath
Cracking mechanisms in durable sisal fiber reinforced cement composites
Cement and Concrete Composites
Development of reliable modeling methodologies for fan blade out containment analysis - Part I: Experimental studies
International Journal of Impact Engineering
Explicit Finite Element Modeling of Multilayer Composite Fabric for Gas Turbine Engine Containment Systems, Phase II, Part 1: Fabric Material Tests and Modeling
DOT/FAA/AR-08/37,P1, Office of Aviation Research and Development, Federal Aviation Administration, U.S. Department of Transportation, Washington, DC
Flexural Analysis and Design of Textile Reinforced Concrete
4th Colloquium on Textile Reinforced Structures (CTRS4), Dresden
Geometrical and mechanical aspects of fabric bonding and pullout in cement composites
Materials and Structures
High speed tensile behavior of sisal fiber cement composites
Materials Science and Engineering A
Image Analyses-Based Nondisruptive Method to Quantify Algal Growth on Concrete Surfaces
Journal of Environmental Engineering, 135 (3), 185-190
Low velocity flexural impact behavior of AR glass fabric reinforced cement composites
Cement and Concrete Composites
Mechanical properties of hybrid fabrics in pultruded cement composites
Cement and Concrete Composites
2008
Cement-based biocide coatings for controlling algal growth in water distribution canals
Cement and Concrete Composites, 30, 839-847
Correlation of tensile and flexural responses of strain softening and strain hardening cement composites
Cement and Concrete Composites, 30 (6), 465-477
Development of Design Guidelines for Strain Softening Fiber Reinforced Concrete
BEFIB 2008, 7th International Symposium on Fibre Reinforced Concrete: Design and Applications, Chennai, 513-523
Development of Fabric Constitutive Behavior for Use in Modeling Engine Fan Blade-Out Events
ASCE
Development of Rational Pay Factors Based on Concrete Compressive Strength Data
Arizona Department of Transportation, Final Report 608
Experimental Development of a Constitutive Model for High-Speed Impact Containment Fabrics
Earth and Space 2008: Proceedings of the 11th International Conference on Engineering, Science, Construction, and Operations in Challenging Environments, ASCE, 1-9
Fabric Reinforced Cement Composite Systems
NSF Conference
Flexural Analysis and Design of Strain Softening Fiber Reinforced Concrete
ACI Convention, Los Angeles
High Strain Rate Testing of Kevlar 49
Image Analysis of Kevlar 49 Fabric at High Strain Rate
Modeling of Aging Response in Glass Fiber Reinforced Concrete Flexural Specimens
15th International Glass Fibre Reinforced Concrete Association Congress (GRC 2008), CD-Proceedings, Prague
Modelling of Aging Response in Glassfibre-reinforced Concrete Flexural Specimens
15th International Glass Fibre Reinforced Concrete Association Congress (GRC 2008), Prague
Recent Advances on High Performance Natural (Sisal) Fiber Cement Composites
BEFIB 2008, 7th International Symposium on Fibre Reinforced Concrete, Chennai
Role of alkali-resistant glassfiber in suppression of restrained shrinkage cracking of concrete materials
15th International Glass Fibre Reinforced Concrete Association Congress (GRC 2008), Prague
The Rehabilitation of the Deficient RC Exterior Beam-Column Joints Using Cement Based Composites
14th World Conference on Earthquake Engineering, Beijing, China
2007
A Cost Based Approach to Design of Residential Steel Roof Systems
Cement-Based Matrix-Grid System for Masonry Rehabilitation
ACI Special Publication SP-244, SP-244, 141
Closed-Form Moment-Curvature Expressions for Homogenized Fiber-Reinforced Concrete
ACI Materials Journal, 104, 351
Closed-form solutions for flexural response of fiber-reinforced concrete beams
Journal of Engineering Mechanics, ASCE, 133 (8), 933-941
@article{soranakom2007closed,
author = {Soranakom, Chote and Mobasher, Barzin},
title = {Closed-form solutions for flexural response of fiber-reinforced concrete beams},
journal = {Journal of Engineering Mechanics},
volume = {133},
number = {8},
pages = {933--941},
year = {2007},
doi = {10.1061/(ASCE)0733-9399(2007)133:8(933)}
}
Effect of Processing on Mechanical Properties of Textile - Reinforced Concrete
ACI Special Publication, Textile Reinforced Concrete symposium, ACI Committee 549, ACI Convention, Kansas City
Flexural Modelling of Strain Softening and Strain Hardening Fiber Reinforced Concrete
High Performance Fiber Reinforced Cement Composites - HPFRCC 5, RILEM Proceedings Pro. 53, Cachan, France, Pro. 53, 155-164
Mechanical Properties of Alkali Resistant Glass Fabric Composites for Retrofitting Unreinforced Masonry Walls
ACI Special Publication SP-244, SP-244, 125
Modeling of Sulfate Resistance of Flyash Blended Cement Concrete Materials
2007 World of Coal Ash (WOCA), Covington, Kentucky, USA
Monotonic and Cyclic Flexural Behavior of Plain Concrete Beams Strengthened by Fabric-Cement Based Composites
Millpress Science Publishers conference proceedings
Numerical Simulation of FRC Round Panel Tests and Full-Scale Elevated Slabs
ACI Special Publication SP-248, SP-248, 31
Pullout-Slip Response of Fabrics Embedded in a Cement Paste Matrix
Journal of Materials in Civil Engineering, ASCE, 19, 718
Rehabilitation of Concrete Structures: Carbon Fiber Reinforced Polymer (CFRP)
STRUCTURE Magazine, InSights
Single Yarn Geometry of Kevlar Fibers - Experimental Characterization
U.S. Department of Transportation, Federal Aviation Administration, Office of Aviation Research, Washington, D.C.
Static and Impact Behavior of Fabric Reinforced Cement Composites in Flexure
High Performance Fiber Reinforced Cement Composites - HPFRCC 5, RILEM Proceedings Pro. 53, Cachan, France, Pro. 53, 463-470
Tensile Behavior of Fabric Cement-Based Composites: Pultruded and Cast
Journal of Materials in Civil Engineering, ASCE, 19, 340
The Strengthening of the Deficient RC Exterior Beam-Column Joints Using CFRP for Seismic Excitation
Millpress Science Publishers conference proceedings
USA – Concrete Construction Industry - Cement Based Material and Civil Infrastructure (CBM & CI)
CBM-CI International Workshop, Karachi, Pakistan
2006
Analytical simulation of tensile response of fabric reinforced cement based composites
Cement and Concrete Composites, 28, 77-89
Bonding in fabric–cement systems: Effects of fabrication methods
Cement and Concrete Research, 36, 1661-1671
Correlation of Tensile and Flexural Behavior of Fiber Reinforced Cement Composites
Ferro8, Proceedings of the 8th International Ferrocement and Thin Reinforced Cement Composites Conference, Bangkok, Thailand
Distributed cracking and stiffness degradation in fabric-cement composites
Materials and Structures, 39 (3), 317-331
Effect of Material Non-Linearity on the Flexural Response of Fiber Reinforced Concrete
Proceedings of the 8th International Symposium on Brittle Matrix Composites (BMC8), Warsaw
Evaluation of Thin Whitetopping PCC Test Sections in Arizona
Modeling of Multilayer Composite Fabrics for Gas Turbine Engine Containment Systems
Journal of Aerospace Engineering, ASCE, 19, 38
Properties of Fabric–Cement Composites made by Pultrusion
Materials and Structures, 39, 787-797
Refractive Change Induced by the LASIK Flap in a Biomechanical Finite Element Model
Journal of Refractive Surgery, 22
Report 36: textile reinforced concrete-state-of-the-art report of RILEM TC 201-TRC
RILEM Publications, RILEM Report 36 (ISBN 2-912143-99-3)
Transport Properties and Concrete Quality
Materials Science of Concrete, Special Volume
2005
Pultruded Fabric-Cement Composites
ACI Materials Journal, 102, 15-23
2004
Cracking Resistance of Asphalt Rubber Mix Versus Hot-Mix Asphalt
International Journal of Road Materials and Pavement Design, 5, 435-452
Fly Ash in Concrete: Proposed Code Revisions and Pultruded Fabric-Reinforced Cement Composites with High Flyash Content
Report submitted to Salt River Project, Phoenix, AZ; Department of Civil and Environmental Engineering, Arizona State University
Image Processing Applications for the Study of Displacements and Cracking in Composite Materials
ASCE conference proceedings
Mechanical Behavior of Alkali-Resistant Glass Fiber Concrete
Report submitted to Vetrotex Cem-Fil S.L., Alcala de Henares, Madrid, Spain; Department of Civil and Environmental Engineering, Arizona State University
Pultrusion of Fabric Reinforced High Flyash Blended Cement Composites
Proceedings, RILEM Technical Meeting, BEFIB 2004, 1473-1482
Pultrusion Versus Casting Processes for the Production of Fabric-Cement Compoites
International RILEM Symposium, Evanston, Illinois
Recent Advances in Modelling Fiber Reinforced Concrete
International Workshop on Advances in Fiber Reinforced Concrete, Bergamo, Italy
Simulation of Expansion in Cement Based Materials Subjected to External Sulfate Attack
Proceedings, RILEM Technical Meeting on Durability of Cement Based Materials
Technology Methods in Textile Cement-Based Composites
RILEM International Symposium, Chicago, IL, USA
Use of R-Curves for Characterization of Toughening in Fiber Reinforced Concrete
Proceedings of the 5th International Conference on Fracture Mechanics of Concrete and Concrete Structures (FraMCoS-V), Vail, Colorado
2003
Economical Concrete Mix Designs for Highway Applications with High Dosage Flyash
Department of Civil and Environmental Engineering, Arizona State University, Tempe, AZ (report prepared with support from Salt River Project)
Mechanical aspects of crimped glass reinforced plastic (GRP) rods
IEEE Transactions on Power Delivery, 18, 852-858
Mechanical Modeling of Glass and Carbon Epoxy Composites
ASCE Engineering Mechanics Conference
Mechanical Properties of Concrete Reinforced with AR-Glass Fibers
Proceedings of the 7th International Symposium on Brittle Matrix Composites (BMC7), Warsaw, Poland, 223-232
Micromechanical Modeling of Filament Wound Cement-Based Composites
Journal of Engineering Mechanics, ASCE, 129, 373
Modeling of Cement Based Composite Laminates
High Performance Fiber Reinforced Cement Composites (HPFRCC4), RILEM Proceedings of the 4th International Workshop, Eds. A. E. Naaman and H. W. Reinhardt, E & FN Spon, 4, 81-93
Modeling of Damage in Cement-Based Materials Subjected to External Sulfate Attack. I: Formulation
Journal of Materials in Civil Engineering, ASCE, 15, 305
The Pultrusion Technology for the Production of Fabric-Cement Composites
Proceedings of the 7th International Symposium on Brittle Matrix Composites (BMC7), Warsaw, Poland, 505-514
2002
Brittle Fracture in Nonceramic Insulators: Electrical Aspects of Microscopic Flaws in Glass Reinforced Plastic (GRP) Rods
IEEE Transactions on Dielectrics and Electrical Insulation, 9, 244-252
Mechanism of Brittle Fracture in Nonceramic Insulators
IEEE Transactions on Dielectrics and Electrical Insulation, 9, 236-243
Modeling of Restrained Shrinkage Cracking in Concrete Materials
American Concrete Institute Special Publication, SP-206, 219-242
Physical and Chemical Activation of High Flyash Content Cement Based Materials
American Concrete Institute Special Publication
2001
Development and Application of High Performance Concrete Materials with Blended Coal Flyash
Report #2 submitted to Salt River Project (SRP), Phoenix, Arizona; Department of Civil and Environmental Engineering, Arizona State University
Structural Analysis and Design Calculations for Hogan Project
Final Report, Department of Civil and Environmental Engineering, Arizona State University
Use of Alkali-Resistant Glass Fibers in Reinforcing Conventional Concrete Materials
Report submitted to Vetrotex Cem-FIL, Saint-Gobain; Department of Civil and Environmental Engineering, Arizona State University
2000
Micromechanical Modeling of Angle Ply Cement Based Composites
Proceedings of the International Symposium Brittle Matrix Composites 6 (BMC-6), Warsaw
Modeling of Toughness Degradation and Embrittlement in Cement Based Composite Materials Due to Interfacial Aging
ASCE Engineering Mechanics Conference, Baltimore, Maryland
1999
Blended Cements
Cement-Based Cross-Ply and Sandwich Laminate Composites
American Concrete Institute Special Publication
Cost-Based Design of Residential Steel Roof Systems: A Case Study
Structural Engineering and Mechanics, 8, 165-180
Effect of Ground Copper Slag on Strength and Toughness of Cementitious Mixes
ACI Materials Journal, 96, 68-74
Mechanical Performance of GRP Rods Used in Nonceramic Insulators After Exposure to Acid Attack
Eleventh International Symposium on High Voltage Engineering, IEE Conference Publication No. 467, 4
Method and apparatus for automated simulation and design of corneal refractive procedures
US Patent 5,891,131 (Arizona Board of Regents)
1998
An Internet Based Modular System for Hands On Study of Mechanics of Materials
ASCE Engineering Mechanics Conference (EM98)
Development of Angle Ply Cement Based Composite Laminates
High Performance Fiber Reinforced Cement Composites (HPFRCC) Symposium, Ann Arbor, Michigan
Finite Element Simulations of Fiber Pullout Toughening in Fiber Reinforced Cement Based Composites
Advanced Cement Based Materials, 7, 123-132
1997
Cement Based Cross-Ply Laminates
Advanced Cement Based Materials, 6, 144-152
Development of Cement-Based Cross-Ply Laminates by Filament Winding Technique
Journal of Materials in Civil Engineering, ASCE (Innovations Forum), 55-57
Evaluation of Crack Propagation Properties of Asphalt Mixtures
Journal of Transportation Engineering, ASCE, 123, 405-413
Mechanical Response of Angle Ply Cement Based Composites
Proceedings, 5th International Symposium on Brittle Matrix Composites (BMC5), Editors A. M. Brandt, V. C. Li and I. H. Marshall, Woodhead Publishing Limited, Warsaw, Poland, 187-198
The Effect of Copper Slag on the Hydration and Mechanical Properties of Cementitious Mixtures
Cement and Concrete Research, 27, 1569-1580
1996
Effect of Interfacial Properties on the Crack Propagation in Cementitious Composites
Advanced Cement Based Materials, 4, 93-105
Mechanical properties of hybrid cement-based composites
ACI Materials Journal, 93, 284-292
Processing Techniques for Manufacturing High Volume Fraction Cement Based Composites
Proceedings, First International Conference for Composites in Infrastructure (ICCI '96), Editors H. Saadatmanesh and M. R. Ehsani, 123-136
Testing of Concrete Under Closed-Loop Control
Advanced Cement Based Materials, 3, 54-71
1995
A Low Cost Retrofit System for Digital Closed Loop Mechanical Testing of Materials
Proceedings, Third Annual Undergraduate Faculty Enhancement Symposium, Teaching the Material Science, Engineering, and Field Aspects of Concrete, University of Cincinnati, July 9-12, 1995, 133-139
Development and Implementation of an Automated Design System for Steel Roof Trusses
Research Transformed into Practice, ASCE, 245-256
Durability of Copper Slag Concrete
Technical Report 95-1, Department of Civil Engineering, College of Engineering and Applied Sciences, Arizona State University; submitted to Materials Research and Recovery, Inc., Tucson, Arizona
Modeling of Stiffness Degradation of the Interfacial Zone During Fiber Debonding
Composites Engineering, 5, 1349-1365
1994
Mechanical Properties of Fiber Reinforced Lightweight Concrete Composites
Cement and Concrete Research, 24, 1121-1132
1991
Characterization of Interfacial Properties in Fiber-Reinforced Cementitious Composites
Journal of the American Ceramic Society, 74, 2156-2164
Effect of Aging on Interfacial Properties of Glass Fiber Reinforced Concrete
Materials Research Society Symposium Proceedings
Effects of Sulfate and Expansive Clinker Contents on Expansion Time of Expansive-Cement Paste
Cement and Concrete Research, 21, 147-157
Modeling of Fiber Toughening in Cementitious Materials Using an R-Curve Approach
International Journal of Fracture, 50, 199-219
1990
A Study of Fracture in Fiber-reinforced Cement-based Composites Using Laser Holographic Interferometry
Experimental Mechanics, 286
An R-Curve Approach for Fracture of Quasi-Brittle Materials
Engineering Fracture Mechanics, 37, 901-913
Interaction Between Fibers and the Matrix in Glass Fiber Reinforced Concrete
ACI Special Publication SP-124, Thin-Section FRC and Ferrocement, 137-156
Microcracking in fiber reinforced concrete
Cement and Concrete Research, 20 (5), 665-676
Quantitative Damage Characterization in Polypropylene Fiber Reinforced Concrete
Cement and Concrete Research, 20, 540-558
Reinforcing Mechanism of Fibers in Cement-Based Composites
PhD dissertation, Department of Civil Engineering, Northwestern University (University Microfilms International, Order No. 9031970)
1989
Test Parameters for Evaluating Toughness of Glass-Fiber Reinforced Concrete Panels
ACI Materials Journal, 86, 448
1988
Drying Shrinkage of Expansive Cements
Journal of Materials Science, 23, 1976-1980
Laboratory Experience with the Rapid Chloride Permeability Test
ACI Special Publication SP-108, 117
Toughness-Durability of Glass Fiber Reinforced Concrete Systems
ACI Materials Journal, 85, 352-360
Undated
Effect of Transverse Yarns in the Pullout of Textile Cement Composites
ECF18, 18th European Conference on Fracture
Laboratory Evaluation of ADOT's Thin Whitetopping PCC Test Sections - Cottonwood
Report to FNF Construction and the Arizona Department of Transportation Materials Group
Simulated Shrinkage Cracking in the Presence of Alkali Resistant Glass Fibers
ACI Special Publication
Toughening of Cement Composites with Wollastonite Micro-Fibers
ACI Special Publication
No publications match the current search and filter.